OTA Wants - Feature requests

raghav.srinivasan · September 11, 2019, 4:11pm

The IMU sensor enables the Auto-cutoff for indicators.

harsha.n · September 11, 2019, 6:25pm

As discussed in owners meet, next update will have that feature.

nagkig · September 12, 2019, 6:04am

@Ather.Team Not sure if this was asked, Along with @Abhishek’s request on Fast charging capability retained always with the portable charger. The new Ather DOT should ideally have a fast charge option for some urgent needs? Is that even possible?

samarthraj · September 12, 2019, 6:32am

@Ather.Team Have you considered adding TPMS in the scooter? It should be relatively easy for Ather, as you have a software already onboard to manage smart features. All you might need is a RF sensor (readily available in market) mounted on a TPMS tubeless valve (again available locally) and integrate the same with your software. With this, user can receive warning, when the tyre pressure is low. Also, most tyre inflation units at Petrol bunks are not calibrated after installation. TPMS can also show actual pressure when being inflated against the indicated pressure as shown on the public inflation system and make necessary correction, if any.

santsplen · September 12, 2019, 9:43am

One thing observed is that right indicator turns off about 5 seconds after its turned on and some time even lesser, left indicator does not turn off at all.I have observed this on multiple instances .
Its good to have autocutoff feature on/off from dashboard like the sound for indicator.

hemanth.anand · September 16, 2019, 2:30pm

2 posts were merged into an existing topic: Updates and new features

ranjan.nikhil · September 16, 2019, 3:10pm

Seems this one isn’t coming!!!

harsha.n · September 16, 2019, 4:13pm

Details of ride gets updated after starting the vehicle. Ride statistics will be stored temporarily in the dashboard.
May be tomorrow i’ll update and get back to you.

hemanth.anand · September 17, 2019, 5:25am

3 posts were merged into an existing topic: Updates and new features

crispypoppadom · September 17, 2019, 3:48pm

There should be an option to name favourites on the app. Like, a friend’s house, the park, a common meeting spot, etc.

“2nd Cross Road” isn’t really appealing.
Also, this makes it faster to select from a list.

subbu00005 · September 26, 2019, 6:40am

Include Parking button option also

abhishek.balaji · October 25, 2019, 5:17am

11 posts were split to a new topic: Hazard lights

abhishek.balaji · October 15, 2019, 11:57am

A post was merged into an existing topic: Open API and Platform

anish.ts · October 15, 2019, 1:37pm

Can we have a option to stop charging at 80% to 90%

rajeshkav · October 15, 2019, 1:45pm

Much needed option. I voted for it.

nagkig · October 16, 2019, 5:35am

And add an option to auto unlock of charging connector after 80% for the public charging stations, in future? Yes, auto cutoff should be first feature.

samarthraj · October 16, 2019, 5:46am

I think auto-cutoff through software is a better option. Addition of mechanical mean to unlock connector only makes assembly more complex and prone to failures. Moreover, auto-cutoff at 80% must be a relatively easy option to be provided through an OTA update.

anish.ts · October 16, 2019, 5:51am

may be a contact owner option in charging screen while on public charging , upon pressing it ,owner should get an alert through app > , else displaying contact number also fine.

arvind_nair · October 16, 2019, 5:51am

If auto unlock is an option that can be enabled, be great if the user can set a cut off via app or dashboard- eg unlock at 60% charge or range = 35kms. Each user may not need 80% or more every time. For eg, I may be looking to get enough charge to just get home and finish charging there.

nagkig · October 16, 2019, 5:54am

mechanical unlock already exists, it is not something new to be added.