I’m a function over form kinda guy, so probably won’t bther. However, the brick has four holes that are used to attach the grill over the fan. Those could be used as a mount for a decorative plate. Attaching one to the frame would only take away from my basic requirement of easy mounting / dismounting.
My installatin is indoors, so not really concerned about that. Even the Dot that’s supposed to be a secure install isn’t safe from somebody with a Philips head screw driver and 2 minutes to spare.
If the intent is to slow down a thief, one could use the single piece bent version of this, screw it firmly into a wall, and use a chain lock / barring plate / whatever to keep the brick from being pulled out.
Even then, somebody with a crowbar could defeat all of this in a minute. So…
You can make it out of anything, really. Mine is powder coated MS. The LASER shop has a lot of MS lying around, sonit saves me the hassle of sourcing material, creating DCs, etc.
I designed the thing myself, so the only cost was for the cutting and powder coating. It was approximately 2k.
Yes. Everything slots into each other.
No it isn’t. But it’s metal, so running a drain wire shouldn’t be a big deal.
This post is for people looking to make their wall charger portable
Caution: do it at your own risk , makes it more vulnerable to theft , probably voids warranty.
I took the wall charger but soon realised I might need it to be portable in some situations. Since I myself installed my charger I knew how it was inside of the wall mount cover and thanks to this thread I got to know the portable charger also has the same size charger inside of it. So I just modified some things to make mine portable.
( Btw you can fit the entire charger with some hassle into the boot )
I just screwed the top bolts upside down, welded some bolts (because I couldn’t put hand nuts on existing bolts and they were kinda hard to access), spray painted the pannel black since the paint was destroyed after the welds, added some magnets to the bottom part of cover to hold it in place.
The light was damaged by my friend while he opened it because he did not know he had to unhook the connector so I just put some LED which was lying around.
I use a tick,small bag made of alcantara to put my charger and put it into the boot. The bag cushions the charger very well inside the boot.
As you can see in the images, my charger wire is run into my home from the shed. I just turn off a switch to stop charging. (A simple solution for people who want to turn off charging. get a switch done inside your house while installing the charger. I know most of you have it directly to your power meter but still thought would let you all know)
Outdoor box holder for all EV Portable charger.
Heavy metal
Powder coated paint.
2 lock system.
This box is not airtight, there is provision for ventilation.
Perfect for Ather 450, 450x ola s1 s1 pro and all EV chargers.
Created this portable charger holder for my new Ather. It is a 3D Printed Part, adding the design file links so that anybody can print it if they want.
is not airtight, there is provision for ventilation.
Perfect for Ather 450, 450x ola s1 s1 pro and all EV chargers.
Jab Marzi kholo or kahin bhi le jao👍
