šŸš€ Introducing Atherstack 5 (Gen 2 and Gen 3)

Announcement & News
34

For ride updates they need full bar, because i get only 1 bar when i am at home and they thought that i put my scooter in shutdown mode at night.

2 Likes
35

Some other first impressions

  1. Battery percentage not showing while charging.
  2. Sports & Warp mode are comparatively smoother than earlier but misses that sweet jurk.
  3. Trip 2 Missing
  4. Home and Office icons gone from Navigation
  5. Dark and Light themes auto switching not available
  6. Brightness bar goes to 100% after every soft reset or sometimes even after every new ignition starts. 7)Front tyre TPMS shows 0, even when it have adequate tyre pressure ie 30 psi
  7. Personally I feel that riding screen is so vacant, I prefer it along with navigation just to look good, though I know my daily route. :smile:
  8. The over all new UI particularly Navigation is not as smooth as what Tarun shown in Ather Community Day 23.
  9. Unable to change modes via touchscreen.
  10. Series 1 special Red Cross lines on dashboards also not available in new UI, those should be there, they are one of the identity of Series 1.
15 Likes
36

Itā€™s been mentioned in the notes, Ravindra. Please give it a read and be patient, the update will roll out eventually.

1 Like
37

Here are my observations till now with Atherstack 5:

  1. Itā€™s really smooth and fun to operate compared to the previous UI

  2. Bluetooth connectivity is a huge issue. Never connect majority of the times. It will only connect if itā€™s in the mood. But 9/10 times it wonā€™t.

  3. Map is a big laggy maybe because I have a Gen 2 and the dash has less RAM for it to operate smoothly.

  4. Love the real-time acceleration meter. It gives you a better idea about your throttle input resulting in better efficiency.

image
image1920Ɨ1438 293 KB

TIP: Keep the acceleration in the lower bar before the slope and I guarantee those complaining about range will be satisfied. Throttle input should be like feather touch.

  1. Motor does not cut off after stand is deployed.

  2. Automatic theme change is missed. I am sure it will probably be part of the future updates but for now we have to change manually.

    The exclusive Series 1 theme not there anymore.

  3. Charging screen takes time to load up once you plug in the charger. Have to keep waiting for atleast 1 to 1.5 min before it shows up.

Will keep updating with more observations if any.

12 Likes
38

Got new Atherstack 5, UI quite impressive and maps are pretty enough to get info and dashboard is more attractive with more quick functions on screen without swipe, Bluetooth was unable to detect and my phone still unconnected

3 Likes
39

5 posts were merged into an existing topic: Discussion on Accessories

44

Is there any workaround for Bluetooth issue? I unpaired my phone after Stack 5 update, and Iā€™m not able to pair again. The phone does not detect the Bluetooth in the scooter as if itā€™s turned off. :frowning:

5 Likes
45

Shutdown and ON it after some time, it should connect. But it will disconnect again after sometime

5 Likes
46

Not sure if I am the only facing this issue or not. I say this because even with the previous version I faced the same issue a couple of times.

1 Like
47

Than better check the side stand sensor, they will adjust the nut.

4 Likes
48

Nothing right now. On the phone it shows connected to the scooter but the scooter refuses to accept that fact. It keeps singin ā€œNahi Nahi, Abhi Nahi, Karo thodda intezaarā€ but owners singsā€¦ā€Nahi Nahi, Mein hun bekararā€ā€¦

2 Likes
49

Service centre has done that couple of times. Can everyone reading this also check?

1 Like
50

For me it was working fine even with previous and recent update

1 Like
51

I see. Will get a confirmation from a couple of more fellow Atherians and then send it to the service centre.

2 Likes
52

Finally got it connected after renaming the Bluetooth display name in the dashboard. I think the rename triggered something :joy::joy:

Something I noticed while renaming is, previously the total chars in the name was 14, when I tried to rename it only displayed 10 chars and did not let me enter anymore. So had to give a short name. Not sure if the char length prevented the Bluetooth from detected.

5 Likes
54

Yea I changed it too but I donā€™t think that should be an issue. Initial releases are usually buggy so I think few upcoming updates might resolve these issues.

4 Likes
55

Disconnect the paired devices from the scooter and completely start pairing up from the beginning as if you have got a new scooterā€¦Thatā€™s the only way :joy:ā€¦

PS:This works :100:

3 Likes
56

already done that 2 times after installing 5.0. Still the same.

5 Likes
57

Fine then ā€˜nahi nahi pairingā€™ till update comes :sweat_smile:ā€¦

4 Likes
58

Purchased Ather 450x in November and all the other 450x guys got the new 5.0 update but i havenā€™t received this yet. Ather any timeline?

6 Likes