Just provide us a toggle option on dashboard to disable auto-cutoff feature until the problem is sorted out. This suggestion is for the safety of the rider. This provision may be made available over an OTA update.
3 Likes
Agree. Facing issue. Sometimes it works. Yet to figure out pattern.
1 Like
Yes, Myself also facing the same issue frequently and when raised this issue, the reply got back is: -----Need to check whether the below will solve the issue.
"Thanks for writing to us! We request you to do a vehicle shutdown, restart and dashboard reset.
Dashboard reset
Step 1: Turn on the vehicle key.
Step 2: Engage the right and left hand brake lever simultaneously along with the start button for 5 seconds.
Step 3: Vehicle dashboard will restart and load to the home screen.
Vehicle shutdown
-
On the dashboard,click on the blue icon (before the network bar) on the top left corner.
-
In the next screen kindly select shutdown (at the bottom), the vehicle will prompt you to turn off the key, kindly do so.
Have a nice day!"
4 Likes
For me the Update has worked. Though the indicator of for both the turns are not synchronized I.e . For left turn it turns off immediately and for right its three beeps more after the vehicle has turned.
The system has become reliable. Weldone Team Ather. Wishing you the best to fine tune the system .
1 Like
One specific glitch is that the turn indicator will turn off if you press both the brakes at once without turning at all. Also the indicators turn off randomly too
How did you fix your indicators. I also have the same problem the indicator at times turns off automatically and at times it does not
I noticed that although the behavior is random, usually the right turn trigger doesn’t respond fast and it switches off after longer. Left randomly switches off. At times using both brakes cancels the left signal!
I had written to Ather team on this issue and after few follow-ups, they sent a technician who checked and confirmed the switch is fine and it is a known SW bug. He also mentioned there is an OTA update expected in the last week of Jan that should fix. Nothing so far!
4 Likes
How do the turning Indicators work? Sometimes they auto-off and sometimes they don’t. Does anyone else have the same issue?
2 Likes
Same !!! They turn off sometimes when I brake before turning as well.
4 Likes
This issue has been somewhat fixed in the coming OTA. Now the indicators do stay on, and auto cut off only at turns. Hopefully, it will be fixed proper in the next OTA.
2 Likes
I don’t see why this complication exists in the first place. A flick of the thumb is all it takes to cancel the indicator. Now you have an expensive, finicky IMU and a whole bunch of processing power being spent on something that is so trivial.
The end result is a product that is needlessly expensive and annoying to boot.
An option to disable auto cutoff indicators would probably work better than all these piecemeal fixes.
4 Likes
Thank you listening to us…really appreciate. Next update will be the most awaited one, fingers crossed.
This might also have a lot to do with it: New recall norms and high cost of loose quality controls
8 Likes
Yes for me also, it turns off before taking a turn and if I apply both the brakes simultaneously it turns off
I can’t believe it’s taking this long for such an integral update. If the indicator wasn’t turning off then it would be manageable, but hilariously enough it just turns off whenever it feels like.
This has been a real problem while switching lanes , and this issue needs to be addressed more seriously than it is being.
I kinda took another test drive a few days back, and in heavy traffic. The only way to get the indicators working like we. want is to implement dash cams with AI. Otherwise it is close to impossible to judge with just one (though complex) sensor to make sure if it was a lane change, a shallow turn, a U, a complicated zig Zag, etc.
Not saying that it can be made better, but unless truly intelligent, it has limitations. More could be done with speed estimates and if there was an angle sensor for the handlebars.
3 Likes
In a world where AI is deciding the drive setting your in - Forward or reverse. This seems like the only way to go in the future. But we’re so far from it as of now 
even tesla doesn’t use AI for auto indicators.
In the end it comes to nuralink-ing human brain 
.
The best way to use the indicators are to be aware of it. I think it happens quickly and you get to an understanding how it operates.
1 Like